Air-Cooled Spindle Motors (800W-5.5kW)
Fan-cooled spindles from 800 W to 5.5 kW, with no pump and no coolant loop.
The air-cooled range covers 800 W to 5.5 kW and removes heat with shaft-mounted fans, so there is no pump, no hose and no coolant to top up. It is the simplest route to a working spindle on a woodworking or signage router.
Request a quotationSend your machine model, tool holder and voltage. We confirm the exact configuration before shipping.
Technical specifications
| Power range | 800 W – 5.5 kW |
|---|---|
| Cooling | Air cooled |
| Typical use | Wood, signage, plastics |
| Supply mode | OEM / wholesale |
Typical applications
- Woodworking routers and signage machines without a coolant circuit
- Shops that want zero coolant maintenance
- Light milling and engraving in short duty cycles
Confirmed before shipment
- Power and voltage for the model you need, 800 W to 5.5 kW
- Collet or chuck type and the tool shank you run
- VFD model, since each air-cooled spindle needs the matching drive
- Mount diameter and the bracket on your Z axis
Frequently asked questions
Air-cooled or water-cooled?
Air cooling is simpler to install and maintain; water cooling holds torque and temperature better in continuous work. For short cycles, air is usually enough.
Does it need a VFD?
Yes. Every model in the range is driven by a VFD matched to its power and voltage.
Can it run all day?
At moderate load, yes. For continuous heavy cutting choose a water-cooled model, which removes heat more consistently.