ATC Spindle Safety Commissioning Guide
Direct answer: Commission an ATC spindle with rotation locked out, clean dry air, the correct holder and pull stud, verified clamp/unclamp feedback, and a low-speed tool-change test before automatic production.
Safe commissioning sequence
- Inspect mechanical and pneumatic connections.
- Verify the approved air range for the exact model.
- Test unclamp and return without a cutting tool.
- Install the correct holder and pull stud.
- Verify clamp confirmation, no-tool/home, and emergency-stop logic.
- Run a low-speed tool-change cycle and record alarms and sensor states.
Use the resources library, select the appropriate ATC spindle, and request technical review before production.
Request ATC Commissioning Support